The sax1 dwarf mutant of Arabidopsis thaliana shows altered sensitivity of growth responses to abscisic acid, auxin, giberellin and ethylene and is partially rescued by exogenous brassinosteroid

Genetic approaches using Arabidopsis thaliana aimed at the identification of mutations affecting events involved in auxin signalling have usually led to the isolation of auxin-resistant mutants. From a selection screen specifically developed to isolate auxin-hypersensitive mutants, one mutant line was selected for its increased sensitivity to auxin (x 2 to 3) for the root elongation response. The genetic analysis of sax1 (hypersensitive to abscisic acid and auxin) indicated that the mutant phenotype segregates as a single recessive Mendelian locus, mapping to the lower arm of chromosome 1. Sax1 seedlings grown in vitro showed a short curled primary root and small, round, dark-green cotyledons. In the greenhouse, adult sax1 plants were characterized by a dwarf phenotype, delayed development and reduced fertility. Further physiological characterization of sax1 seedlings revealed that the most striking trait was a large increase (x 40) in ABA-sensitivity of root elongation and, to a lesser extent, of ABA-induced stomatal closure; in other respects, hypocotyl elongation was resistant to gibberellins and ethylene. These alterations in hormone sensitivity in sax1 plants co-segregated with the dwarf phenotype suggesting that processes involved in cell elongation are modified. Treatment of mutant seedlings with an exogenous brassinosteroid partially rescued a wild-type size, suggesting that brassinosteroid biosynthesis might be affected in sax1 plants. Wild-type sensitivities to ABA, auxin and gibberellins were also restored in sax1 plants by exogenous application of brassinosteroid, illustrating the pivotal importance of the BR-related SAX1 gene

Uranium(III) coordination chemistry and oxidation in a flexible small-cavity macrocycle

U(III) complexes of the conformationally flexible, small-cavity macrocycle trans-calix[2]benzene[2]pyrrolide (L)2–, [U(L)X] (X = O-2,6-tBu2C6H3, N(SiMe3)2), have been synthesized from [U(L)BH4] and structurally characterized. These complexes show binding of the U(III) center in the bis(arene) pocket of the macrocycle, which flexes to accommodate the increase in the steric bulk of X, resulting in long U–X bonds to the ancillary ligands. Oxidation to the cationic U(IV) complex [U(L)X][B(C6F5)4] (X = BH4) results in ligand rearrangement to bind the smaller, harder cation in the bis(pyrrolide) pocket, in a conformation that has not been previously observed for (L)2–, with X located between the two ligand arene rings

Complexation of lanthanides, actinides and transition metal cations with a 6-(1,2,4-triazin-3-yl)-2,2’:6’,2’’-terpyridine ligand: implications for actinide(III) /lanthanide(III) partitioning

The quadridentate N-heterocyclic ligand 6-(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-1,2,4-benzotriazin-3-yl)-2,2’:6’,2’’-terpyridine (CyMe4-hemi-BTBP) has been synthesized and its interactions with Am(III), U(VI), Ln(III) and some transition metal cations have been evaluated by X-ray crystallographic analysis, Am(III)/Eu(III) solvent extraction experiments, UV absorption spectrophotometry, NMR studies and ESI-MS. Structures of the 1:1 complexes with Eu(III), Ce(III) and the linear uranyl (UO22+) ion were obtained by X-ray crystallographic analysis, and showed similar coordination behavior to related BTBP complexes. In methanol, the stability constants of the Ln(III) complexes are slightly lower than those of the analogous quadridentate bis-triazine BTBP ligands, while the stability constant for the Yb(III) complex is higher. 1H NMR titrations and ESI-MS with lanthanide nitrates showed that the ligand forms only 1:1 complexes with Eu(III), Ce(III) and Yb(III), while both 1:1 and 1:2 complexes were formed with La(III) and Y(III) in acetonitrile. A mixture of isomeric chiral 2:2 helical complexes was formed with Cu(I), with a slight preference (1.4:1) for a single directional isomer. In contrast, a 1:1 complex was observed with the larger Ag(I) ion. The ligand was unable to extract Am(III) or Eu(III) from nitric acid solutions into 1-octanol, except in the presence of a synergist at low acidity. The results show that the presence of two outer 1,2,4-triazine rings is required for the efficient extraction and separation of An(III) from Ln(III) by quadridentate N-donor ligand

Evaluation of chloroform/methanol extraction to facilitate the study of membrane proteins of non-model plants

Membrane proteins are of great interest to plant physiologists because of their important function in many physiological processes. However, their study is hampered by their low abundance and poor solubility in aqueous buffers. Proteomics studies of non-model plants are generally restricted to gel-based methods. Unfortunately, all gel-based techniques for membrane proteomics lack resolving power. Therefore, a very stringent enrichment method is needed before protein separation. In this study, protein extraction in a mixture of chloroform and methanol in combination with gel electrophoresis is evaluated as a method to study membrane proteins in non-model plants. Benefits as well as disadvantages of the method are discussed. To demonstrate the pitfalls of working with non-model plants and to give a proof of principle, the method was first applied to whole leaves of the model plant Arabidopsis. Subsequently, a comparison with proteins extracted from leaves of the non-model plant, banana, was made. To estimate the tissue and organelle specificity of the method, it was also applied on banana meristems. Abundant membrane or lipid-associated proteins could be identified in both tissues, with the leaf extract yielding a higher number of membrane proteins

Molecular and electronic structure of terminal and alkali metal-capped uranium(V) nitride complexes

Determining the electronic structure of actinide complexes is intrinsically challenging because inter-electronic repulsion, crystal field, and spin–orbit coupling effects can be of similar magnitude. Moreover, such efforts have been hampered by the lack of structurally analogous families of complexes to study. Here we report an improved method to U≡N triple bonds, and assemble a family of uranium(V) nitrides. Along with an isoelectronic oxo, we quantify the electronic structure of this 5f1 family by magnetometry, optical and electron paramagnetic resonance (EPR) spectroscopies and modelling. Thus, we define the relative importance of the spin–orbit and crystal field interactions, and explain the experimentally observed different ground states. We find optical absorption linewidths give a potential tool to identify spin–orbit coupled states, and show measurement of UV···UV super-exchange coupling in dimers by EPR. We show that observed slow magnetic relaxation occurs via two-phonon processes, with no obvious correlation to the crystal field

Small Molecule Activation by Uranium Tris(aryloxides): Experimental and Computational Studies of Binding of N-2, Coupling of CO, and Deoxygenation Insertion of CO2 under Ambient Conditions

Previously unanticipated dinitrogen activation is exhibited by the well-known uranium tris(aryloxide) U(ODtbp)(3), U(OC6H3-Bu-2(t)-2,6)(3), and the tri-tert-butyl analogue U(OTtbp)(3), U(OC6H2-Bu-3(t)-2,4,6)(3), in the form of bridging, side-on dinitrogen complexes [U(OAr)(3)](2)(mu-eta(2):eta(2)-N-2), for which the tri-tert-butyl N-2 complex is the most robust U-2(N-2) complex isolated to date. Attempted reduction of the tris(aryloxide) complex under N-2 gave only the potassium salt of the uranium(III) tetra(aryloxide) anion, K[U(OAr)(4)], as a result of ligand redistribution. The solid-state structure is a polymeric chain formed by each potassium cation bridging two arenes of adjacent anions in an eta(6) fashion. The same uranium tris(aryloxides) were also found to couple carbon monoxide under ambient conditions to give exclusively the ynediolate [OCCO](2-) dianion in [U(OAr)(3)](2)(mu-eta(1):eta(1)-C2O2), in direct analogy with the reductive coupling recently shown to afford [U{N(SiMe3)(2)}(3)](2)(mu-eta(1):eta(1)-C2O2). The related U-III complexes U{N(SiPhMe2)(2)}(3) and U{CH(SiMe3)(2)}(3) however do not show CO coupling chemistry in our hands. Of the aryloxide complexes, only the U(OC6H2-Bu-3(t)-2,4,6)(3) reacts with CO2 to give an insertion product containing bridging oxo and aryl carbonate moieties, U-2(OTtbp)(4)(mu-O)(mu-eta(1):eta(1)-O2COC6H2-Bu-3(t)-2,4,6)(2), which has been structurally characterized. The presence of coordinated N-2 in [U(OTtbp)(3)](2)(N-2) prevents the occurrence of any reaction with CO2, underscoring the remarkable stability of the N-2 complex. The di-tert-butyl aryloxide does not insert CO2, and only U(ODtbp)(4) was isolated. The silylamide also reacts with carbon dioxide to afford U(OSiMe3)(4) as the only uranium-containing material. GGA and hybrid DFT calculations, in conjunction with topological analysis of the electron density, suggest that the U-N-2 bond is strongly polar, and that the only covalent U -> N-2 interaction is pi backbonding, leading to a formal (U-IV)(2)(N-2)(2-) description of the electronic structure. The N-N stretching wavenumber is preferred as a metric of N-2 reduction to the N-N bond length, as there is excellent agreement between theory and experiment for the former but poorer agreement for the latter due to X-ray crystallographic underestimation of r(N-N). Possible intermediates on the CO coupling pathway to [U(OAr)(3)](2)(mu-C2O2) are identified, and potential energy surface scans indicate that the ynediolate fragment is more weakly bound than the ancillary ligands, which may have implications in the development of low-temperature and pressure catalytic CO chemistry